When you set up a new shrimp tank, there are pieces of equipment that should be considered as essentials. I strongly believe that RO/DI system is one of them.
A reverse osmosis system is an efficient, economical way to produce high-purity water. All in all, RO/DI systems are largely very similar, both in appearance and functionality. Therefore, if you are not limited with money, you have a wide range of choices on the market.
However, if you are looking for a cheap but reliable system I will recommend to take a look at Aquatic Life RO Buddie 4-Stage Reverse Osmosis System. This RO/DI system is easy to install. It is supplemented by a partial pre-assembly, so you will be up and running in no time.
Aquatic Life RO Buddie 4-Stage Reverse Osmosis System (Link to check the price on Amazon).
First of all, this RO/DI system is produced by a top brand manufacturer. That is why you can expect that it will perform the best in terms of functionality.
Aquatic Life RO Buddie is an economical 4-stage starter RO/DI filtration system for freshwater aquariums. It makes up to 50 gallons (~225 liters) per day.
Other features of this product include a faucet adapter, quick connections for easy removal and replacement of cartridges, mounting brackets to hold the unit securely. It is a very compact system that can be installed almost anywhere.
- Easy to set up.
- Easy to perform maintenance on it.
- Portable and compact build.
- Requires less pressure to operate.
- Great membrane (Works great getting TDS to 0 ppm).
- Color changing deionization resin cartridge is made of clear plastic for easy viewing.
Lots of aquarists with small aquariums use a portable system like the RO Buddie. Considering the fact that, we do not have to do big water changes in shrimp keeping hobby. This RO/DI unit will be the best choice for its price.
Aquatic Life RO Buddie + DI Installation
Nonetheless, if you are planning to buy something more serious for bigger freshwater shrimp tanks, then the LiquaGen 5-Stage Reverse Osmosis/Deionization (RO/DI) (or LiquaGen – 6 Stage Reverse Osmosis + Deionization (RO/DI) Water) will be the unit to choose.
This is a heavy-duty RO/DI system with lots of features. It is easy to clean, install and makes up to 100 gallons (~450 liters).
According to the manufacturer, it can be used in aquariums, labs, or any other place where you need ultra-pure water!
The same as the previous unit, it is extremely easy to set up because the manufacturer has already pre-assembled it. It has a manual flush valve for an increase and extended membrane life. In addition, the 5-stage filtration process will remove all contaminants from the water.
- High-quality components.
- Longer lasting filters.
- It has a high capacity.
- The membrane has a high rejection rate
- Easy to install and maintain
This includes longer lasting filters and high-quality connect fittings that help the product to run for longer before filters need replacing.
Stage 1 (The mechanical filter)
Once input water enters your filtration system, it enters the sediment filter. This mechanical filter removes larger debris particles from the water.
Stage 2 (The carbon filter)
In the second stage, the carbon filter, a carbon media removes organics and a variety of other toxins that have dissolved into the water, including chemicals regularly found in tap water such as chlorine. This is often the stage that is replicated in 5 or 6-stage filtration RO/DI systems, as the process can be particularly taxing for the carbon filter.
Stage 3 (RO membrane)
The water passes through a sequence of thin, film membranes that further purify the water. These membranes catch the vast majority of bacteria, heavy metals and sodium particles, amongst others.
Stage 4
Finally, the flow of water is divided after this stage, with waste water being filtered out and purified water being collected separately for use within your aquarium.